Magnetic,structural and electrical properties of ordered and disordered Co50Fe50 films

Co₅₀Fe₅₀ films with thickness varying from 100 to 500 Å were deposited on a glass substrate by sputtering process, respectively. Two kinds of CoFe films were studied: one was the as-deposited film, and the other the annealed film. The annealing procedure was to keep the films at 400 °C for 5 h in a vacuum of 5×10⁻⁶ mbar. From the X-ray study, we find that the as-deposited film prefers the CoFe(1 1 0) orientation. Moreover, the body-centered cubic (bcc) CoFe(1 1 0) line is split into two peaks: one corresponding to the ordered body-centered tetragonal (bct) phase, and the other, the disordered bcc phase. After annealing, the peak intensity of the ordered bct phase becomes much stronger, while that of the disordered bcc phase disappears. The annealing has also caused the ordered CoFe(2 0 0) line to appear. When the amount of the ordered bct phase in Co₅₀Fe₅₀ is increased, the saturation magnetization (M_s) and coercivity (H_c) become larger, but the electrical resistivity (ρ) decreases. From the temperature coefficient of resistance (TCR) measurement, we learn that the bct grains in the CoFe film start to grow at temperature 82 °C.     

Anionic polymerization of star-shaped nylon 6 with a trifunctional initiator

The anionic polymerization of ?-caprolactam (CLM) has been shown to proceed at high reaction rate when catalyzed by metallic lactamates and initiated by acyllactams. The role of initiator and catalyst concentration on the process of ?-caprolactam anionic polymerization has been explored, with the aim of selecting the most suitable experimental conditions for reaction injection molding (RIM). The overall polymerization rates and physical properties for reaction injection molding of star-shaped nylon 6 homopolymer have been studied by the quasi-adiabatic process. In order to model the actual rapid molding conditions, time vs. temperature reaction profiles were measured, and the relative rates of polymerization subsequently determined from these data.     

Territories,corridors, and networks: A biological model for the premodern state

When depicted on maps as homogenous territorial wholes, ancient states are visually summarized as static entities in a way that conceals the highly fluid dynamics of polity formation, maintenance, and growth. Models derived from studies of animal behavior show that “territory” does not consist of an undifferentiated use of the landscape. Instead, the concept of territory can be parsed into a series of resource‐rich nodes linked by corridors of access, surrounded by unutilized regions and boundaries marked at points of competition. Ancient human groups also can be analyzed as having perceived and occupied landscapes through strategies of flexible networks in which nodes and corridors were surrounded by unutilized spaces around which boundaries were selectively identified and defended. This strategy is identifiable in human social groups at different levels of complexity ranging from hunter‐gatherers through ancient chiefdoms and states. © 2007 Wiley Periodicals, Inc. Complexity 12: 28–35, 2007     

Coupled Thermo-Hydro-Mechanical and Chemical Analysis of Expansive Clay Subjected to Heating and Hydration

A fully coupled formulation combining reactive transport and an existing thermo-hydro-mechanical (THM) code is presented. Special attention has been given to phenomena likely to be encountered in clay barriers used as part of containment systems of nuclear waste. The types of processes considered include hydrolysis, complex formation, oxidation/reduction reactions, acid/base reactions, precipitation/dissolution of minerals and cation exchange. Both kinetically-controlled and equilibrium-controlled reactions have been incorporated. The total analytical concentrations (including precipitated minerals) are adopted as basic transport variables and chemical equilibrium is achieved by minimizing Gibbs Free Energy. The formulation has been incorporated in a general purpose computer code capable of performing numerical analysis of engineering problems. A validation exercise concerning a laboratory experiment involving the heating and hydration of an expansive compacted clay is described.     

Frozen Landweber Iteration for Nonlinear Ill-Posed Problems

In this paper we propose a modification of the Landweber iteration termed frozen Landweberiteration for nonlinear ill-posed problems.A convergence analysis for this iteration is presented.The numericalperformance of this frozen Landweber iteration for a nonlinear Hammerstein integral equation is compared withthat of the Landweber iteration.We obtain a shorter running time of the frozen Landweber iteration based onthe same convergence accuracy.     

A qualitative investigation of the oscillations of a pendulum with a periodically varying length and a mathematical model of a swing

The behaviour of the amplitude-frequency characteristics of families of periodic solutions, produced from the equilibrium position of a system, is established by a qualitative investigation of the equation of the oscillations of a pendulum, the length of which is an arbitrary periodic function of time. The non-local conditions for their stability and instability, expressed in terms of the amplitude and frequency of the oscillations, are obtained. The results are used when discussing the parametric and self-excited oscillatory model of a swing. In the parametric model the length of a swing is a specified periodic function of time, and in the self-excited oscillatory model it is a function of the phase coordinates of the system. For an appropriate choice of these functions, both systems have a common periodic solution. It is shown that the parametric model leads to an erroneous conclusion regarding the instability of the periodic mode, which is in fact realized in the oscillations of a swing, whereas the self-excited oscillatory model indicates its stability.     

Pressure recovery system for a high-power HF/DF laser: implementation practice

The matter of development of a high-performance pressure recovery system (PRS) for a high-power HF/DF laser is discussed. A sequence of design steps is proposed, which involves estimation of basic characteristics of PRS components with the help of one-dimensional integral and semi-empirical procedures; simulation, to be performed using three-dimensional non-stationary Navier — Stokes equations; experimental modelling aimed at verification of the calculation procedures and at refinement of obtained parameters; and a fullscale experiment. An ejector-type system providing for recovery of pressure from 12 Torr to atmospheric pressure in the gas-dynamic system of an HF/DF laser of several-tens-kilowatt power is developed. Matching conditions for parameters of individual PRS components as well as joint functioning of the PRS with a continuous chemical laser in an integral complex are analysed. Conditions for minimization of mass-dimensional characteristics of the laser-PRS complex necessary for the development of ground-based mobile systems are identified.